Print Page | Close Window

Service Pack for iFly 737NG Released

Printed From: iFly Development Team Forums
Category: iFly General User Forums
Forum Name: iFly Public Announcments and Forum Information
Forum Description: Public Announcements and Forum Information
Printed Date: Sep-23-2020 at 8:14am
Software Version: Web Wiz Forums 11.10 -

Topic: Service Pack for iFly 737NG Released
Posted By: Jannier
Subject: Service Pack for iFly 737NG Released
Date Posted: Nov-27-2019 at 4:31am
                                    PLEASE READ PRIOR TO INSTALLING SERVICE PACK

As minimum the following "base packages" are required.

1.  SP will install only over FS2004 and FSX/FSX-SE base pack 3.2.1, P3Dv3 base pack 3.2.2 and P3Dv4 base pack 3.2.3.

2.  SP will also install over previous Service Packs. 

3.  If you do not have the required minimum version installed, please see the installation discussion in the respective support forums.

4.  The service pack will replace aircraft.cfg files, so you will have to reinstall liveries.

NOTE:  The sole version of the iFly 737NG we now support is SP  We simply do not have the time to respond to reports of issues which were fixed long ago.

News from the iFly Developer Team:  SP is the final update for the iFly 737NG series and brings develop of this software to an end.

SP  Fix list and refinements since the last Service Pack. 
Listed below are items reported by customers, but many more not listed below were corrected following checks by the beta team and developers.
1. EFIS- TERR map resolution improved
2. DU Font width adjusted for better readability
3. EFIS- MINS RST button logic corrected
4. At CDU LEGS page, the first waypoint cannot be deleted,     Even if the route is not active.
5. If active waypoint has an altitude constraint, the altitude will display below the waypoint name on the ND, with/without DATA button pressed.  The non-activated/active waypoint will display altitude data only when DATA button pressed.
6. The MCP IAS|MACH changeover switch is INOP when on the ground, and IAS displays only 100.  Changeover function will only work with aircraft in the air and the MCP IAS> 0.6M.
7. Fixed Yaw Damper activation logic issue introduced with v3.2.3.3.
8. FTD Client - Improved WXR map resolution.
9. FTD Client - Added Compass gauge.
10. Adjusted ENG N1% reaction with L/R ENG bleed and Isolation valve position activity.
11. When VSD is active on ND, VOR 1 and 2 now display on Left/Right lower corners.
12. When ND at PLAN mode, the *MAP* warning flag position was corrected.
13. Corrected texture issue at Yaw damper gauge in VC.
14. Fixed missing packs sound.
15. Fixed config tool PAX weight issue in 800, 700ER profiles.
16. Fixed FS2004 issue where config tool sometimes CTD silently.
17. Fixed issue with RadAlt MINS and further improved the disengaged alert logic.
18. Fixed issue with the IRS ENT light when using the keyboard for data entry.
19. When set Gen 1 Fail, the AC meter may display the wrong Gen 2 data.
20. Corrected wording on Cabin Temp selectors (HD texture pack - P3Dv4) 
21. Fixed Spoiler A cover not opening.
22. 700ER and 900ER VC Aux Fuel gauge light issue at dusk, night, dawn. (P3Dv4)
23. BBJ 1 - 3, 2D Panel size issue, ISFD option at dusk, night and dawn. (all versions)
24. Improved TCAS Altitude accuracy.
25. Fixed missing A/P warning when Elec Trim switches are moved.
26. Fixed an intermittent issue on PERF INIT page.

Go here for SP [Access ONLY for Licensed Members]

FS2004:" rel="nofollow -

FSX/FSX-SE:" rel="nofollow -

FSX CBE:" rel="nofollow -

P3D:" rel="nofollow -

P3D CBE:" rel="nofollow -

Happy iFlying!!


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 -
Copyright ©2001-2017 Web Wiz Ltd. -